To make gypsum traction requires templates. For a simple traction or cornice, the template will be a regular board, inhabited by tin. To end it, you need to cut off a piece of sheet metal, strengthen it on the board. On top of the metal with conventional buttons, the paper circuit circuit is fixed, which is pricked with an awl. Having thus transferred the pattern to the metal, the paper is removed and finished with the contours of the picture, leaving allowances for sawing. Drowned (cutting out the board, made a contour. Extra wooden parts are cut off with a sharp knife to get a profile. One of the parties is granted with steel or tin, the other is cut at a slight angle, degrees 20.We mount the template