Apply glue to the marked segment of the base with a brush or roller. And also lubricate the first strip of wallpaper with glue and leave it to lie down for a couple of minutes to allow the glue to absorb. The direction of wrapping the wallpaper should be parallel to the direction of the light from the window. Take the first strip of wallpaper and attach one end to the junction of the ceiling and wall (your assistant must support the other end). Then begin to evenly smoot the wallpaper on the ceiling with a special roller or towel. At the same time, do not forget to make sure that the edge of the wallpaper does not go to the side and is parallel to the wall line. Tip: after gluing the canvas, repeatedly smear the edge of the wallpaper with glue — they dry out the fastest. With each next strip, you do the same manipulations, only now each next strip glue the junction in the joint with the previous strip of wallpaper. To get around the chandelier, you need to make a neat incision. When gluing the last strip, bend the wallpaper along the joint of the ceiling and walls and carefully cut off the excess part. Once again, pay attention to that throughout all the work on gluing and preferably 24 hours after the end, there was a constant temperature in the room, and there were no drafts.