Any technological process begins with the preparation of raw materials, including the production of ceramic bricks. Such products are divided into: building material (full -bodied — per voids of less than 13%) and facing — decorative, finishing, glazed, restoration. Now the entire production process is automated. Brick is released in two ways: plastic molding and dry pressing. In the first case, products are obtained from mass with higher humidity. In the second, the mixture is crushed to a powder state, the mold is carried out using presses without drying or with short -term drying.
Modern production of ceramic bricks
Похожие статьи
Свежие публикации
Популярное
Таблица обменных курсов
| Валюты | Курс | Изменение % |
|---|---|---|
 USD | 90,53 | +0,01% |
 EUR | 99,37 | +0,50% |
 GBP | 115,18 | +0,59% |
 BTC | 3 829 642,24 | –0,44% |
 AUD | 61,20 | +0,86% |
 JPY | 0,63 | –0,75% |
 CNY | 12,79 | +0,79% |
 CAD | 67,89 | +0,48% |
Курсы валют в RUB на 19.12.2023
На этом сайте вы найдете множество новостей про США. Читайте, делитесь информацией, заходите еще!