Protruding parts

The first stage. Preparation of the floor and premises before laying

Еще публикации

Экскурсия на рыбалку в Бахрейне: что взять от солнца — и как не перегреться на борту при ветре, жаре и отражении от воды без потери кайфа

09.02.2026

Гид по скрытым платежам и коммунальным услугам в Тбилиси

27.01.2026

Eliminate defects covered with linoleum of the floor: align the surface as best as possible. If the last of concrete, then you can use, for example, self -leveling mixtures for screed. But with large surface deformations, it is better to apply another approach. In such situations, an even surface for linoleum can be created using the flooring of a wooden floor, chipboard, GVL, MDF or moisture -resistant plywood. However, in this case, do not forget that the floor level rises significantly, and this must be taken into account when installing interior doors. Check the floor surface for any protruding parts, any tubercles must be eliminated. They can arise through the laid linoleum and ruin its appearance, as well as create other inconvenience.