How to properly care for a wooden floor

Еще публикации

Экскурсия на рыбалку в Бахрейне: что взять от солнца — и как не перегреться на борту при ветре, жаре и отражении от воды без потери кайфа

09.02.2026

Гид по скрытым платежам и коммунальным услугам в Тбилиси

27.01.2026

It can be confidently argued that parquet is the most famous type of flooring. He is durable, durable. There are no equal parquet by environmental cleanliness. However, today there are already more modern floor coverings made using the latest technologies. This is an veneered parquet with different texture, Parquet Tarkett and Laminate Parquet. A wipped parquet — the veneer is glued on top not only of valuable, but even from exotic wood species. The thickness is approximately 0.8 mm. The middle layer has a bearing base of fiberboard, which is approximately 7 mm, and the lowest layer is plywood. The connection of the plates is carried out using a «click system». To protect against moisture penetration, special impregnation is used. The veneered parquet is not afraid of the temperature and humidity difference, heals quickly. Therefore, the combination of the «warm floor» and the natural tree is perfect. After decorating the floor, a skirting boat is laid with an veneered parquet. A plastic skirting board is appropriate here. Laminate — as the top layer, paper with a texture for a natural tree is used, protected by a transparent film and melamine coating. Fits on the foamyleuritan base, is not attached to the base. Each “board” is glued together with each other or a “click system” is used.If necessary, the canvas is changed, t. To. the damaged surface of the board is not restored. After laying the laminate, the plinth is installed. In this version, a plastic skirting board is used. Tarkett parquet board — a layer of natural wood (thickness up to 4 mm) of a valuable breed (type of cut, color, pattern are selected very carefully), the middle layer is made of fiberboard, and coniferous wood is used from below, about 10 mm thick thicknesses. When laying, the boards are attached to each other with the help of crests and grooves in the ends and edges. The parquet board perfectly withstands a change in temperature and humidity, it is easily used with the «warm floor» system.After laying the parquet board, it is necessary to lay the skirting board. Opked skirting boards are used here.