From the board

Working for a workbench

So that the template is easily slipped, you need to lubricate the workbench. As soon as gypsum will begin to harden, it is laid out on a workbench. Penka is placed in the first gypsum layer for strength. Act quickly, otherwise the solution will freeze. Move the template smoothly along the rail, clutching tightly to the workbench. The movement of the template by part without iron is called “on the gloss”, a chopped part — “on the peel”. Move the template only forward. He is returned back to its original position, removing from the board. Put gypsum and repeat the movement “on the gloss” until the product is completely ready. Then they are waiting for the solidification. The excess from the product is removed by the movement «on the peel». In the finale, the details of the gypsum are again put on the traction, move “on the gloss”, removing all the excess. Cut the ends at 90 degrees in traction made.

Еще публикации

Купівельний договір у Чехії: основні положення та поради

25.08.2025

Десятиденна dálniční známka в Чехії: зручний вибір для подорожей та транзиту

11.08.2025